View DSTINIS-00X_2936166.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 12 rev: 061608 general description the tini ? sockets boards are motherboards designed to host the corresponding tini evaluation module. the combination of the two boards allows full evaluation of the features of the target microprocessor. to eval uate the ds80c400, you only need to order the ds80c400-kit. to evaluate the ds80c410 or ds80c411, you must order both the dstinim410# and the dstinis400# and use them together. the dstinim410# is used to evaluate both the ds80c410 and ds80c411. although various boards suppo rt different evaluation modules, the most popular is the dstinis400#. it includes a 144-pin sodimm connector and provides 1-wire ? , can 2.0b, serial, and a 10/100 ethernet phy for connecting the dstinim400# or dstinim410# to the physical world. the dstinim400# and dstinim410# are designed as modules to be plugged into the 144-pin sodimm connector on the dstinis400#. all are fully assembled and, when used together in the correct combinations, they form a complete evaluation system for the network microcontroller. the dstinim400# and dstinim410# modules include the ds80c400 and ds80c410 network microcontrollers, a real-tim e clock, 1mb flash, 1mb static ram, and support for an external ethernet phy for connecting to a wide variety of networks. detailed information about the initial setup process and use of the tini platform is contained in application note 612: getting started with the tinim400 (ds80c400) verification module. ordering information part input voltage* used with module dimensions dstinis400 replaced with dstinis400# dstinis400# 5v dc regulated dstinim400 12cm x 10cm dstinis-005 5v dc regulated dstini1-1mg, dstini1-512 16cm x 10cm dstinis-006 9v to 18v dc dstini1-1mg, dstini1-512 16cm x 10cm note: the dstinim400 is an evaluation board and is only tested to prototype standards. it is not tested for use in a production product. * the user must supply an external power supply. # denotes a rohs-compliant device that may include lead that is exempt under the rohs requirements . features hosts the tini runtime environment in validated hardware design (in conjunction with the dstinim400) 10/100 base-t ethernet port two serial ports dual 1-wire network ports can 2.0b port 5.0v single-supply operation (dstinim400) fully assembled and tested design component list designation qty description c1 1 47pf capacitor (1206) c2, c4, c5, c6 4 47 f tantalum capacitors (3528-21) c3, c7, c9, c13, c15, c26, c28, c30, c38 9 100nf capacitors (1206) c12, c14, c17, c19, c25, c27, c29, c33, c37 9 10nf capacitors (1206) c8 1 220nf, 16v capacitor (1206) c10, c31, c32, c34, c35, c36 6 1.0 f capacitors (1206) c11 1 4.7 f capacitor (1206) dstinis400/DSTINIS-00X sockets evaluation board www.maxim-ic.com tini and 1-wire are registered trademarks of maxim integrated products, inc.
dstinis400/DSTINIS-00X so ckets evaluation board 2 of 11 component list (continued) designation qty description c16, c18 2 270pf capacitor (1206) c20, c21, c22 3 1nf, 2kv radial capacitors (ceramic disk) c23, c24 2 27pf capacitors (1206) c40 1 0.10 f 10%, 50v capacitor (1206) d1 1 1n5908 d0-201 d2 1 bat54 sot23 d3, d4 2 bat54s sot23 j1 1 sodimm144 molex 54698-7000 j2 1 2.5mm center, 5.5mm outside barrel connector j3?j6, j20, j21, j27 7 dual-row connectors, 0.025 square pins j7 1 rj-45 modular jack j9, j10, j11 3 3 x 1-pin headers, 0.1 centers j12 1 db9 serial female j13 1 db9 serial male j14 1 pad jumper j16 1 rj11 modular jack l1 1 22 h inductor q1 1 bss84 sipmos fet sot23 r1 1 205k 1% resistor (1206) r2 1 121k 1% resistor (1206) r3 1 10k 5% resistor (1206) r4?r7, r8, r10, r11, r12 8 49.9 1% resistors (1206) r13, r9 2 47 resistor (1206) r14 1 22.1k 1% resistor (1206) r15, r17, r18 3 220 resistors (1206) designation qty description r16 1 10k resistor (1206) r19 1 pad jumper r20 1 47k resistor (1206) r21 1 124 1% resistor (1206) r22, r23 2 1k resistor (1206) r24 1 10k resistor (1206) t1 1 belfuse s558-5999-t7 transformer u1 1 max1692 pwm step-down regulator u3 1 intel lxt972alc ethernet phy u4, u5, u6 3 dialight 597-7741 led u7 1 max560cai transceiver u8 1 ds2480b serial 1-wire line driver u9 1 ds9502 esd protection diode u11 1 65hvd230d can transceiver y1 1 25.000mhz, hc49us z1, z2, z3 3 ferrite bead, fair-rite 2512067007y3 unpopulated components j15 1 ds9094f i button ? clip j18, j28, j29, j30 1 not used u2 1 max1792eua18 linear regulator u10 1 ds2408 1-wire 8-channel addressable switch u12 1 not used jumpers (dstinis400) network boot jumper (j3) jumper configuration 1-2 ds80c400 attempts to boot through ethernet using dhcp and tftp dtr reset jumper (j14) jumper configuration 1-2 dtr reset communicates with the ds80c400 loader application. quiet boot jumper (j5) jumper configuration 1-2 ds80c400 boots without sending loader information to serial port. i button is a registered trademark of maxim integrated products, inc.
dstinis400/DSTINIS-00X so ckets evaluation board 3 of 11 dstinis400 ethernet configuration jumpers (j9, j10, j11) auto- negotiation speed (mbps) duplex j9 j10 j11 half 2-3 (l) 2-3 (l) 2-3 (l) 10 full 2-3 (l) 2-3 (l) 1-2 (h) half 2-3 (l) 1-2 (h) 2-3 (l) disabled 100 full 2-3 (l) 1-2 (h) 1-2 (h) half 1-2 (h) 2-3 (l) 2-3 (l) 100 only full/half 1-2 (h) 2-3 (l) 1-2 (h) half only 1-2 (h) 1-2 (h) 2-3 (l) enabled 10/100 full or half 1-2 (h) 1-2 (h) 1-2 (h) pin headers connnector description j18 recreated i/o port. latched from 1-wire bus. requires installation of ds2408. see schematic. j20 can bus. see schematic for pinout. j21 spi? bus. see schematic for pinout. alternately provides connection to p5.4?p5.7 j27 i 2 c bus. see schematic for pinout. alternately provides connection to p1.0 and p1.1. j28, j29, j30 unused. no user-accessible pins available. quick start recommended equipment the sockets board requires an external power supply and cables as needed to ac cess the desired features of the board. the 5v dc power supply is mandatory, but the other cables are required only if that feature is to be used. the specific example shown here is for a dstinim400#/dstinis400# system. hardware: 5v dc power supply input voltage: per customer requirements output voltage: 5v dc 10% output current: >150ma polarization: positive center output plug type: 2.5mm i.d. x 5.5mm o.d. x 12mm female (p-6) example: digi-key (www.digikey.com) part number t309-p6p-nd (110v input), 5v dc power ethernet cable: note: there are two types of ethernet cable. for connecti on to a router or hub, use a standard "straight-through" ethernet cable. for direct connection to an ethernet port on the back of a pc, use a "crossover" ethernet cable. a crossover cable is specially made for two-computer netw orking. these cables can be purchased from almost any computer or electronics store. example (straight-through): radio shack (www.radiosh ack.com) cat 5e (3ft) network cable, part number 278- 1763 example (crossover): radio shack cat 5e (3m) crossover cable, part number 278-2011 rs-232c serial cable (db9 male to db9 female): this cable is straight-through, not a null-modem (crossover). these cables c an be purchased from any computer or electronics store.
dstinis400/DSTINIS-00X so ckets evaluation board 4 of 12 important note regarding u12 component u12 is not placed on the product as supplied by maxim, nor is it available for sale from maxim. inclusion of this component and related circuitry in the schematic is intended to demonstrate one method to add i/o expansion capability to the dstinis400, but the implementation details are left to the user; any modification of the product is not guaranteed or supported by maxim. for more information on the possible uses of component u12, refer to application note 3664: expanding tini?s i/o capability and application note 3412: tinis400 external serial port reference design . more information tini platform details can be found at www.maxim-ic.com/tini . the tini specification and developer?s guide (addison-welsey, 2001) is an invaluable resource when developing with the ti ni platform. download a free copy from our website at www.maxim-ic.com/tiniguide . additional resources for detailed information about the initial set up and use of the tini platform, refer to application note 612: getting started with the tinim400 (ds80c400) verification module at www.maxim-ic.com/an612 . ds80c400 network microcontroller data sheet: www.maxim-ic.com/ds80c400 ds80c410 networked microcontroller data sheet: www.maxim-ic.com/ds80c410 ds80c400 evaluation kit (ds80c400-kit): www.maxim-ic.com/ds80c400-kit dstinim400 networked microcon troller evaluation board: www.maxim-ic.com/dstinim400 dstinim410 networked microcon troller evaluation board: www.maxim-ic.com/dstinim410 microcontroller website: www.maxim-ic.com/microcontrollers spi is a trademark of motorola, inc.
dstinis400/DSTINIS-00X so ckets evaluation board 5 of 12 maxim/dallas semiconductor cannot assume res ponsibility for use of any circuitry other than circuitry entirely embodied in a ma xim/dallas semiconductor product. no circuit patent licenses are implied. maxi m/dallas semiconductor reserves the right to change the circuitry and specification s without notice at any time. maxim integrated products, 120 san gabriel drive, sunnyvale, ca 94086 408-737-7600 ? 2008 maxim integrated products the maxim logo is a registered trademark of maxim integrated produ cts, inc. the dallas logo is a registered trademark of dallas semiconductor corporation. revision history revision date description pages changed updated the component list . 1, 2 100906 replaced the auto negotiation jump er (j9), 10/100mb ethernet jumper (j10), and full-duplex jumper (j11) sections with the dstinis400 ethernet configuration jumpers (j9, j10, j11) section. 3 added ?#? to the end of dstinis400 references 1, 3 121406 updated ordering information table and added note that the dstinim400 is only tested to prototype standards. 1 070507 changed the dtr reset jumper (j4) to dtr reset jumper (j14) section. 2 061608 in the component list , changed the description for c2, c4, c5, c6; added ?(ceramic disk)? to c20, c21, c22 description. 1, 2
5 5 4 4 3 3 2 2 1 1 d d c c b b a a p50 txclk mdio vcc3 txd3 p52 p53 rxd2 rxd0 nrstout p30 col txen p16 p12 p14 rxer p51 mdc txd1 nrstin p67 crs p17 p11 p13 p15 r xclk r xdv rxd1 txd2 rxd3 txd0 p10 p33 p31 p32 nce0 nce1 nce2 d0 d1 d2 d3 d4 d5 d7 d6 npce1 npce3 npce0 npce2 nce7 nce6 nce5 nce4 nce3 p66 v50 v33 nrstin nrstout txen txd[3:0] txclk rxdv rxclk rxer rxd[3:0] col crs mdc mdio d[7:0] local1w nwr nrd ale npsen a16 a17 a18 a19 a20 a21 npce[3:0] nce[7:3] a2 a1 a3 a0 p67 p66 p50 p51 p52 p53 p30 p31 p32 p33 p10 p11 p12 p13 p14 p15 p16 p17 title size document number r e v date: sheet o f tinis400 c tinim400 socket board: tini module connector b 1 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim j1 dimm144 gnd1 1 gnd2 2 vcc3 3 vcc4 4 a13 5 nrstin 6 a16 7 nram2en 8 a15 9 a8 10 a14 11 a9 12 a17 13 a11 14 a20 15 npsen 16 a19 17 a10 18 d6 19 d7 20 d5 21 d3 22 d4 23 nflashen 24 d2 25 a0 26 d1 27 a4 28 d0 29 p1.4 30 a3 31 p1.5 32 a2 33 nram1en 34 a1 35 p1.3 36 a12 37 p1.2 38 p1.6 39 p1.1 40 p1.7 41 p1.0 42 nrstout 43 nea 44 crs 45 txen 46 col 47 rxer 48 rxdv 49 mdc 50 mdio 51 gnd52 52 gnd53 53 txd.3 54 txd.2 55 txd.1 56 txd.0 57 gnd58 58 gnd59 59 txclk 60 rxclk 61 gnd62 62 gnd63 63 rxd.0 64 rxd.1 65 rxd.2 66 rxd.3 67 gnd68 68 gnd69 69 nc70 70 p3.0 71 ale 72 p3.1 73 p5.3 74 p3.2 75 npce1 76 nc77 77 npce3 78 p3.3 79 npce0 80 nc81 81 npce2 82 nwr 83 nc84 84 nrd 85 nc86 86 p5.2 87 nc88 88 nc89 89 nc90 90 nc91 91 nc92 92 nc93 93 nc94 94 p5.1 95 p5.0 96 a18 97 nce3 98 nce2 99 nce1 100 nce0 101 p6.7 102 p6.6 103 a21 104 nce7 105 nce6 106 nce5 107 nce4 108 a5 109 nc109 110 a6 111 nc112 112 a7 113 nc114 114 nc115 115 local1w 116 nc117 117 vpullup 118 nc119 119 nc120 120 nc121 121 nc122 122 nc123 123 nc124 124 nc125 125 nc126 126 nc127 127 nc128 128 nc129 129 nc130 130 nc131 131 nc132 132 nc133 133 nc134 134 nc135 135 nc136 136 nc137 137 nc138 138 nc139 139 nc140 140 vcc141 141 vcc142 142 gnd143 143 gnd144 144
5 5 4 4 3 3 2 2 1 1 d d c c b b a a nextint vcc5 vcc3 vcc3 vcc3 v33 v18 v50 v33 p53 p17 p52 p32 title size document number r e v date: sheet o f tinis400 c tinim400 socket board: power and internals a 2 7 thursday, may 22, 2003 copyright (c) 2003 dallas semiconductor / maxim 5 vdc +-5% input connect for net boot connect for quiet boot diagnostic port male 2mm power jack external interrupt center positive j3 2pin 1 2 + c4 47uf j6 3pin 1 2 3 d1 1n5908 c7 0.1 uf q1 bss84 c8 0.22 uf + c6 47uf r3 10 k l1 22 uh z1 bead r1 205k 1% u1 max1692 in 1 lim 6 shdn 8 ref 4 bp 2 lx 9 fb 5 sync/pwm 7 gnd 3 pgnd 10 r2 121k 1% c9 0.1 uf c1 47 pf j4 3pin 1 2 3 c3 0.1 uf + c2 47uf + c5 47uf c11 4.7uf j5 2pin 1 2 j2 87-72010-004 1 2 3 u2 max1792eua18 in2 2 rst 3 shdn 4 out1 8 out2 7 set 6 gnd 5 in1 1 c10 1.0uf
5 5 4 4 3 3 2 2 1 1 d d c c b b a a txd2 txd1 rx d1 rx d2 rx d3 txd0 txd3 rx d0 vcc3 vcc3 vcc3 vcc3 vcc3 vcc3 rxer txd[3:0] col mdc crs rxclk txen mdio rxdv rxd[3:0] txclk nrstout title size document number r e v date: sheet o f tinis400 c tinim400 socket board: ethernet a 3 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim a_gnd a_gnd 10/100-base-t ethernet phy mode configuration phy mode configuration phy mode configuration decoupling caps for u2 a_gnd a_gnd 1% 1% 1% 1% c14 0.01 uf c15 0.1 uf c20 0.001 uf, 2 kv r17 220 c16 270 pf c21 0.001 uf, 2 kv c18 270 pf r16 10 k c19 0.01 uf u5 597-7741 1 2 3 4 c22 0.001 uf, 2 kv y1 25.000 mhz u3 lxt972alc xi 1 xo 2 mddis 3 reset 4 slew0 5 slew1 6 gnd1 7 vccio1 8 gnd2 11 addr0 12 gnd3 13 gnd4 14 gnd5 15 gnd6 16 rbias 17 gnd7 18 tpop 19 tpon 20 vcca1 21 vcca2 22 tpip 23 tpin 24 gnd9 25 gnd10 26 tdi 27 tdo 28 tms 29 tck 30 trst 31 gnd8 32 mdint 64 crs 63 col 62 gnd13 61 txd3 60 txd2 59 txd1 58 txd0 57 tx_en 56 tx_clk 55 tx_er 54 rx_er 53 rx_clk 52 vccd 51 gnd12 50 rx_dv 49 rxd0 48 rxd1 47 rxd2 46 rxd3 45 mdc 43 mdio 42 gnd11 41 vccio2 40 pwrdwn 39 led_cfg1 38 led_cfg2 37 led_cfg3 36 test1 35 test0 34 pause 33 c23 27 pf r13 47 c24 27 pf r15 220 r8 49.9 1% r10 49.9 1% j10 3 pin 1 2 3 c25 0.01 uf r14 22.1 k 1% r19 0 ohm u6 597-7741 1 2 3 4 c26 0.1 uf r18 220 r7 49.9 c27 0.01 uf r6 49.9 r5 49.9 j9 3 pin 1 2 3 c30 0.1 uf r4 49.9 j7 rj-45 1 2 3 4 5 6 7 8 c17 0.01 uf r11 49.9 1% c29 0.01 uf r12 49.9 1% c28 0.1 uf z2 bead z3 bead c12 0.01 uf r25 option c13 0.1 uf j8 pad 1 r9 47 j11 3 pin 1 2 3 u4 597-7741 1 2 3 4 t1 s558_5999_t7 1 8 6 3 16 14 11 9 2 7 10 15
5 5 4 4 3 3 2 2 1 1 d d c c b b a a tx0 dtr4 rts4 tx4 rx0 dtr0 rx4 cts4 dc d4 dcd4_232 cts4_232 rx4_232 tx4_232 dtr4_232 rts4_232 tx0_232 rx0_232 dtr0_232 vcc3 p31 p15 p16 p67 p30 p66 p33 p14 nrstin nshdn title size document number r e v date: sheet o f tinis400 c tinim400 socket board: internal serial ports 0 and 4 a 4 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim serial port 0 serial port 4 connect to enable reset from dtr j12 db9 female (dce) 1 2 3 4 5 6 7 8 9 j13 db9 male (dte) 1 2 3 4 5 6 7 8 9 + c31 1 uf c33 0.01uf r20 47k + c34 1 uf u7 max560cai c1+ 12 c1- 14 t1in 7 t2in 6 t3in 20 t4in 21 r1out 8 r2out 5 r3out 26 r4out 22 r5out 19 v+ 13 vcc 11 en 24 shdn 25 c2+ 15 c2- 16 gnd 10 v- 17 t1out 2 t2out 3 t3out 1 t4out 28 r1in 9 r2in 4 r3in 27 r4in 23 r5in 18 j14 pad jumper + c32 1 uf + c35 1 uf + c36 1 uf
5 5 4 4 3 3 2 2 1 1 d d c c b b a a tx1 xowio rx1 vcc5 vcc5 vcc5 p13 p12 local1w nextint title size document number r e v date: sheet o f tinis400 c tinim400 socket board: external 1-wire interface an d ds2408 a 5 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim i-button clip external 1-wire 8 i/o lines with strobe u9 ds9502 c1 1 a1 2 nc1 3 c2 6 nc2 4 a2 5 j17 pad jumper c37 0.01 uf j18 11x1 1 2 3 4 5 6 7 8 9 10 11 c38 0.1 uf j15 ds9094f u8 ds2480b gnd 1 vdd 4 txd 7 rxd 8 pol 6 nc 3 owio 2 vpp 5 d2 bat54 u10 ds2408 nc1 1 nc15 15 nc16 16 vcc 3 owio 4 gnd 5 strb 10 p0 2 p1 14 p2 13 p3 12 p4 11 p5 9 p6 8 p7 7 + c39 47uf j16 rj11 1 2 3 4 5 6
5 5 4 4 3 3 2 2 1 1 d d c c b b a a c0tx c0rx sda sclk npce0 npce1 npce2 npce3 vcc3 vcc5 vcc5 vcc5 vcc3 vcc5 vcc3 vcc5 vcc5 v50 v33 v33 p50 p51 p10 p11 npce[3:0] nshdn title size document number r e v date: sheet o f tinis400 c tinim400 socket board: other i/o a 6 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim i2c bus can bus connect to terminate spi d4 bat54s 1 2 3 r22 1 k j19 r21 124 j21 4x2 1 2 3 4 5 6 7 8 r23 1 k c40 0.1 uf j26 pad jumper j20 5x2 1 2 3 4 5 6 7 8 9 10 j27 4 header pins, 0.1" 1 2 3 4 r24 10k j22 j23 j24 u11 sn65hvd230 vcc 3 gnd 2 rs 8 canh 7 canl 6 txd 1 rxd 4 vref 5 j25 d3 bat54s 1 2 3
5 5 4 4 3 3 2 2 1 1 d d c c b b a a d7 d6 d5 d4 d3 d2 d1 d0 nce3 nce4 nce5 nce6 nce7 a1 a17 a19 a20 a18 a16 uio0 uio1 uio2 uio3 uio4 uio5 uio7 uio8 uio9 uio10 uio11 uio12 uio13 uio14 uio15 uio16 uio17 uio18 uio19 uio20 uio21 uio6 uio32 uio31 uio30 uio29 uio28 uio27 uio26 uio25 uio23 uio24 uio22 xio0 xio1 xio2 xio3 xio5 xio6 xio7 xio15 xio14 xio13 xio12 xio11 xio10 xio9 xio8 xio0 xio1 xio2 xio3 xio4 xio5 xio6 xio7 xio8 xio9 xio10 xio11 xio12 xio13 xio14 xio15 uio0 uio1 uio2 uio3 uio4 uio5 uio6 uio7 uio8 uio9 uio10 uio11 uio12 uio13 uio14 uio15 uio16 uio17 uio18 uio19 uio20 uio21 uio22 uio23 uio24 uio25 uio26 uio27 uio28 uio29 uio30 uio31 uio32 xio4 tdo tdo a21 a0 a2 a3 v18 v18 v33 v33 v33 v18 v33 d[7:0] ale nrstout npsen nrd nwr nce[7:3] nextint p53 p17 a16 a17 a18 a19 a20 a21 a0 a1 a2 a3 title size document number r e v date: sheet o f dstinis400 c programmable i/o a 7 7 wednesday, may 21, 2003 copyright (c) 2003 dallas semiconductor / maxim each u1 v33 connection one 10 nf ceramic capacitor for each u1 v18 connection expanded i/o user i/o one 10 nf ceramic capacitor for one 100 nf ceramic capacitor for each u1 v33 connection one 100 nf ceramic capacitor for each u1 v18 connection j29 20 pin dual 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 c42 100nf c41 100nf c51 10nf c47 100nf c57 10nf c49 10nf c43 100nf c50 10nf j30 8pin 1 2 3 4 5 6 7 8 c48 100nf j28 40 pin dual 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 c54 10nf c55 10nf u12 xc2c64-7vq100c io1 1 io2 2 io3 3 io4 4 vaux 5 io6 6 io7 7 io8 8 io9 9 io10 10 io11 11 io12 12 io13 13 io14 14 io15 15 io16 16 io17 17 io18 18 io19 19 vxx 20 gnd21 21 io22 22 io23 23 io24 24 gnd 25 v18a 26 io27 27 io28 28 io29 29 io30 30 gnd1 31 io32 32 io33 33 io34 34 io35 35 io36 36 io37 37 vio1 38 io39 39 io40 40 io41 41 io42 42 io43 43 io44 44 tdi 45 io46 46 tms 47 tck 48 io49 49 io50 50 gnd4 75 io74 74 io73 73 io72 72 io71 71 io70 70 gnd3 69 io68 68 io67 67 io66 66 io65 65 io64 64 io63 63 gnd2 62 io61 61 io60 60 io59 59 io58 58 v18b 57 io56 56 io55 55 io54 54 io53 53 io52 52 vio2 51 gnd6 100 io99 99 vio4 98 io97 97 io96 96 io95 95 io94 94 io93 93 io92 92 io91 91 io90 90 io89 89 vio3 88 io87 87 io86 86 io85 85 gnd5 84 tdo 83 io82 82 io81 81 io80 80 io79 79 io78 78 io77 77 io76 76 c45 100nf c56 10nf c53 10nf c52 10nf c46 100nf c44 100nf

▲Up To Search▲

Price & Availability of DSTINIS-00X

	To Download DSTINIS-00X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .